December 11, 2017
/ Posted in: DIY, The Ol' Sage Builder
Each fiber-cement siding product has its own installation instructions. These can be found in the Evaluation Service Report document(ESR). Before preparing to install siding, search online for the ESR by typing ESR and the product’s name. Knowing what the manufacturer’s instructions are is essential for the correct installation of your fiber-cement siding.
Read The Full Post »
November 29, 2017
/ Posted in: The Ol' Sage Builder
While most professionals have some experience with home energy audits, there are many contractors who take short cuts. Knowing what to expect from a home energy audit and the right questions to ask will ensure that you get the most accurate results.
Read The Full Post »
November 14, 2017
/ Posted in: DIY, The Ol' Sage Builder
As the weather cools, you may notice that your windows ‘sweat’ whenever the temperature drops below 40 degrees F. Water condenses on the window and runs down to wet the frames and sills.
Read The Full Post »
October 13, 2017
/ Posted in: The Ol' Sage Builder
Housewrap is a great way to reduce air leakage and prevent water from entering the wall system, however care must be taken to ensure it gets installed correctly!
Read The Full Post »
September 27, 2017
/ Posted in: The Ol' Sage Builder
When structural panels are not spaced properly and moisture conditions change some problems can arise. Best to follow the advice of the Ol’ Sage Builder and space those panels correctly!
Read The Full Post »
August 22, 2017
/ Posted in: The Ol' Sage Builder
Pinnacle is an excellent mid-tier grade of T&G sub floor that is priced just right. Pinnacle T&G fits together easily and it’s easy on equipment so you won’t be breaking screw heads off.
Read The Full Post »
August 2, 2017
/ Posted in: The Ol' Sage Builder
When installing tongue and groove OSB sub-flooring panels, it is essential that you space them correctly. Sub-flooring panels will expand and contract with changes in ambient moisture.
Read The Full Post »
July 25, 2017
/ Posted in: The Ol' Sage Builder
Every now and then it seems we get a glimpse back in time, and this user submitted photo showcases a blast from the past let-in bracing.
Read The Full Post »
June 30, 2017
/ Posted in: The Ol' Sage Builder
When it comes time to upgrade your roof you might opt for heavy tiles/slates and it’s best to know if your existing SolarBord can handle that kind of load.
Read The Full Post »